GBS LiFePO4 High Power battery 100Ah-C

Standard properties

  • High performance: The continuous discharge current standard is recommended between 0.3C to 1C.
  • The continuous maximum current is 3C.
  • The maximum impulse discharge current for <10 sec is at 10C.
  • The maximum charging current is 1C
  • Good performance at temperatures from +5 ° C to +40 ° C.
  • The battery structure is stable and safe
  • Good performances at low temperatures. The 100% discharge is defined at 20 ° C. At temperatures below 0 ° C, the discharge current power falls. Do not charge battery under 0 ° C.
  • Security: The battery can not explode or burn through internal or external damage.
  • Long life cycle: The capacity of the cells occurs after 5000 cycles at 80 % strength capacity utilization in the range of 80% of the initial capacity.
  • Adapted for fast charging: Within an hour, the battery can be charged to 85%. Fully charged after 2-3 hours
  • Low cost relative to performance / lifetime.
  • Battery does not contain polluting heavy metals
  • Battery is made with modern materials at state of the art

Technische Parameter

Nennkapazität | Rated Capacity (0,2C) 100Ah Ladezyklen | Cycle Life
Nennspanung | Nominal Voltage (0,2C) 3,2V 100% Kapazitätsnutzung | 100% DOD ≥3000
Max. Ladestrom | Max. Charging Current ≤0,8C-1C 90% Kapazitätsnutzung | 90% DOD ≥5000
Laden Einzelzelle | Single cell charging 3,65V Laden | Charging 0 ~ 45°C
Laden Batteriepack | Battery pack charging 3,65V Lagertemperatur | Storage temperature -20°C ~ +60°C
Max. Entladung Einzelzelle | Single cell discharging 2,5V Arbeitstemperatur | Working Temperature 0°C ~ +40°C
Max. Entladung Batteriepack | Battery pack discharging 2,6V
Max. Entladungs-Strom | Continuous Current 1C Selbstentladungsrate pro Monat | Self Discharge rate (month) ≤2%
Max. Entladungs-Stromimpuls | Impulse Current 3C (10s) Energieleistungsdichte | Power Density >800w/kg
Innenwiderstand | Internal Resistance ≤0,4mΩ Gewicht | Cell Weight 2.3 kg±100g
Durchschnittlicher Entladestrom | Constant current 100A Zellengröße | Dimension 126mm x 46mm x 244mm

Dimensions of the battery


Safety instructions before using the battery

  • Preclude a short- circuit in battery
  • Charge battery fully before the first use.
  • The battery pack is secured with a clamping plate, please never remove the clamping plates while using.
  • Check the voltage of cells, it should range of 3.31 – 3.33 volts
  • Install the BMS according to our instructions to prevent overcharging and deep discharge.
  • Check if all parts are complete.
  • The installation should be carried out in accordance with the accompanying description.
  • The 4 screws should be connected to the silvered copper bridges.
  • A not intended application reduces life of your battery.

Care and Maintenance

  • The battery is permanently sealed (maintenance free)
  • Do not deform or puncture Battery mechanically. Do not short-circuiting Cathode and Anode. Please do not throw the battery into fire.
  • Do not connect different types of batteries with each other.
  • Do not connect cells of different capacity either in series or parallel.
  • Please store the battery in a dry and ventilated place. Please keep away from food, moisture, heat and fire.
  • Please charge the battery for more than 60% capacity before storing them longer. Check the voltage monthly. If it is below 3 volts per cell, the battery must be charged.

Charging cycles


Charging curve

Charging curve of a single cell with different charging times
(The maximum voltage is 3.55V)


Discharge curves

Discharge curve of a single cell with different discharge times
(The minimum voltage is 2.8 volts)


We would be happy to advise you on the selection of the right battery cells for an optimal design of your battery storage system.